- Title
- Tailings Filtration Using Viper Filtration Technology—a Case Study
- Creator
- Whatnall, Olivia; Barber, Kevin; Robinson, Peter
- Relation
- Mining, Metallurgy and Exploration Vol. 38, Issue 3, p. 1297-1303
- Publisher Link
- http://dx.doi.org/10.1007/s42461-021-00378-y
- Publisher
- Springer
- Resource Type
- journal article
- Date
- 2021
- Description
- Investigation and uptake of filtered tailings continues to grow throughout the globe. This is driven by a wide range of site-specific considerations, which include such factors as tailings characteristics (e.g., amenability to filtration), production rates, climate, water availability, cost drivers, environmental requirements, and social factors. Despite the aforementioned technological growth, the currently available filtration technology is not able to meet the needs of many operations and projects that would otherwise adopt the technology. Experience with large-scale industrial filtration shows that vacuum belt filter systems meet the needs of many modern users, exceptions being the inability to effectively dewater tailings at altitude and/or with a fine particle size distribution: a potential fatal flaw. This paper presents a case study on the utilization of the patented Viper Filtration technology on gold tailings to overcome this challenge and shares the resultant full-scale plant design, highlighting the features designed to overcome cost and scalability deterrents. This technology is a novel mechanical process which complements the vacuum pressure in dewatering the filter cake as it travels along the belt filter. This project commenced with a pilot testing program, which successfully met the objective to rigorously test, measure and record any performance improvements achieved when engaging the Viper technology. Of the two tailings products tested, gross improvements of 4.2%w/w and 5.7%w/w were achieved when compared to the conventional vacuum belt filter operation. This pilot testing facilitated measurement of operating and design data, which forms the basis of the full-scale system design and resultant equipment supply of three vibration roller assemblies for retro-fitting on the existing vacuum belt filter.
- Subject
- tailings; dewatering; filtration; dry stack; viper
- Identifier
- http://hdl.handle.net/1959.13/1474636
- Identifier
- uon:49329
- Identifier
- ISSN:2524-3462
- Language
- eng
- Reviewed
- Hits: 1680
- Visitors: 1677
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|